SKU: CP0000005622 SKU e prodhuesit: V-IPMUX-16 Kategori: Communication, Service Providers, TDM Access, Circuit Emulation Brand: Veecom

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, V-IPMUX-16 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 8~16 E1s and 5 GE electrical ports and 1 GE optical port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.

Key Features:

Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, Anyone of 5 GE electrical ports may act as NM port
Support Ethernet spanning tree protocol which enable normal work and protection in ring and mesh topology, protection resume in short time
User-friendly Web server supported for easy setup and maintenance, alarm log provided
Support SNMP V1/V2 network management
Ethernet built-in layer 2 switch, support VLAN, comply with IEEE 802.3x, 802.1P
Provide two pluggable E1 cards, each card supports 8 E1/T1s
Point to point and point to multipoint supported
Stable E1 clock recovery, low jitter and wander
Low processing delay for E1 channels, high bandwidth usage efficiency
Resist to packet loss, with PCM frame synchronization protection
User definable encapsulation packet size for different application
Support Ethernet encapsulation and UDP/IP protocol encapsulation
Support VLAN settings for E1 service and in band VLAN management
Enough jitter buffer to resist packet delay variation (PDV)
Local Ethernet port throughput limiting, assuring E1 QoS
120ohm balanced E1/T1 port, RJ-45 connector, support 75ohm unbalanced port through outside converting cable
Support cascade concatenate for more than 16 E1 ports
Software and hardware online upgrade
Power supply redundancy.

Datasheet

Përshkrimi

Capacity

It supports 8 or 16 E1 ports, 5 GE electrical ports and 1 GE optical port.

E1 interface

Comply with ITU-T G.703 recommendation
Eight E1 Ports Supported.E1 port impedance E1-120Ω for twisted pair cables or 75Ω for coax (The RJ45 E1-120Ω are default for ports)
End-to-end delay (minimum delay setting) £ 10ms
Output frequency offset (adaptive timing, stabilized) £ 5 ppm
Output jitter (adaptive timing) £ 0.1UI

T1 interface

Frame format: Unframed, SF (D4), ESF
Bit rate: 1.544Mbps
Line Code: B8ZS / AMI
Line impedance: 100 ohms
Receiving level: 0 to -36dB
Pulse amplitude: Nominal 3.0V ±20%
Zero amplitude: ±0.1V
Transmit frequency tracking : Internal timing±30 ppm
Loopback timing±50 ppm,
External timing±100 ppm
Jitter Performance: According to ITU-T G.824

10/100/1000Base-Tx port

Comply with IEEE 802.3, 802.1
10M/100M/1000M Adaptive
Half/Full Duplex Adaptive
Support 802.1Q MAC
Uplink ports 1+1 backup supported
Ethernet built-in layer 2 switch function. Support 802.1Q VLAN, 802.1ad Q in Q, 802.1p

Power

AC:100V~260V/50Hz (fuse: 1A)
DC:-36V ~ -72V (optional) or dual power supply
Power Consumption: ≤9W

Operating condition

Temperature: (0～45) ℃
Humidity: ≤90％(non-condensing)

Dimensions

Width × Height × Depth： 440 × 44 × 260 mm

Weight

≤ 3.5 kg