AXIS M7016 Video Encoder

Përshkrimi

• Cost-effective 16-channel solution

AXIS M7016 Video Encoder is an easy-to-use 16-channel video encoder with good video performance. It can simplify migration to network video without upgrading existing camera systems.

• Affordable, yet powerful

AXIS M7016 provides edge storage through four microSDHC memory card slots. It supports all types of analog cameras including PTZ (pan/tilt/zoom) and PTZ domes. The video encoder features both RS-422 and RS-485 for controlling analog PTZ cameras.

• The easy way to a smarter CCTV system

AXIS M7016 is perfect for large analog video installations, especially where an IP network infrastructure is already in place. It is powered over Ethernet using the same cable as for data transmission, which simplifies installation. A power supply is also included in the package.

• Reduced bandwidth and storage

AXIS M7016 can deliver two simultaneous video streams, one in H.264 and another in Motion JPEG, at 30 frames per second in resolutions up to D1 (720×480 in NTSC, 720×576 in PAL).

TECHNICAL SPECIFICATIONS

VIDEO

• Video compression: H.264 (MPEG-4 Part 10/AVC) Baseline and Main Profile Motion JPEG.
• Resolutions:

• 1536×1152 to 176×120 for quad view.
• 720×576 to 176×120.

• Frame rate:

• 25/30 (PAL/NTSC) fps.
• 15 fps in quad view in full resolution.

• Video streaming:

• Multiple streams if identical or limited in frame rate/resolution.
• Controllable frame rate and bandwidth, VBR/CBR H.264.

NETWORK

• IP address: Four IP addresses, one per four channels.
• Security: Password protection, IP address filtering, HTTPSa encryption, IEEE 802.1Xa network access control, Digest authentication, User access log.
• Supported protocols: IPv4/v6, HTTP, HTTPSa , IEEE 802.1Xa , QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, CIFS/SMB.

GENERAL

• Casing: Metal casing, Standalone, rackmount or wallmount.
• Memory:

• 4x 512 MB RAM.
• 4x 128 MB Flash.
• Power: AXIS PS-P power supply 12 V DC, 17 W.
• Connectors: 16 x Analog composite video BNC inputs, NTSC/PAL auto-sensing 1 x 1000 Base TX Ethernet on RJ45 4 x Terminal blocks for RS422/RS485 serial communication (full duplex) 1 x DC input terminal block.