Industrial Power Supply, 90 ~ 264 VAC; 127 ~ 370 VDC

Përshkrimi

• Rated Power: 90W (max).
• Ripple & Noise: 240mVp-p (max) (Measured at 20MHz by using a 12” twisted pair terminated with a 0.1uf &47uf capacitor).
• Voltage Tolerance: ±2.5% (Includes set up tolerance, line regulation, load regulation).
• Line Regulation: ±1.0% (Line regulation is measured from low line to high line at rated load).
• Load Regulation: ±2.5%.
• Setup, Rise Time: 1000ms, 50ms/230VAC; 1000ms, 50ms/115VAC at full load (Length of setup time is measured at first cost start. Turning ON/OFF the power supply may lead to increase of the setup time).
• Hold up Time: 20ms/230VAC type; 20ms/115VAC at full load typical.
• Input Voltage: 90-264VAC, 127-370VDC (Derating may be needed under low input voltages. Check the derating curve for more details.).
• Input Frequency Range: 47-63 Hz.
• Power Factor: PF>0.91/230VAC typical; PF>0/95/115VAC at full load typical.
• Efficiency: 91% typical.
• AC Current: 1.3A/115VAC typical; 0.6A/230VAC typical.
• Inrush Current: 70A/230VAC (max).
• Leakage Current: 1mA/240VAC (max).
• Withstand Voltage: I/P-O/P: 3KVAC, I/P-FG: 2KVAC. O/P-FG: 0.5KVAC.
• Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25°C/70%RH.
• Protection:

• Overload: 110-150% rated output power (Hiccup mode, recovers automatically after fault condition is removed).
• Overvoltage: 105-135% rated output voltage (Shut down o/p voltage, re-power on to recover).
• Over Temperature: Shut down o/p voltage, re-power on to recover.

• Dimensions: 

• Width: 5.71” [145 mm].
• Depth: 2.36” [60 mm].
• Height: 1.26” [32 mm].

• Environment     

• Operating: -30°C to +70°C (See derating curve).
• Storage: -40°C to +85°C.
• Humidity: 20% to 90% (non-condensing).

• Weight: 0.99 lbs. [0.45 kg].
• MTBF: 348.7K hours min MIL-HDBK-217F (25°C).
• Vibration: 10-500Hz, 2G 10min/1 cycle period for 60 min each along X,Y,Z axes.