HomeCommunication, Service Providers, TDM Access, Circuit Emulation

The PacketBand+ TDM-4

Ask us about this product

Shiko listën

The product is already in quote request list!
Vlereso këte produkt
Me porosi

SKU: CP0000005620 SKU e prodhuesit: PB-PLUS-TDM-4 Kategori: Communication, Service Providers, TDM Access, Circuit Emulation Brand: Net2Edge

Four clock-locked clear channel or structured E1/T1 circuits over Ethernet, or IP networks.

KEY FEATURES

Four E/1/T1 ports.
Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP.
Capable of exceeding G.823/4 Synchronous Interface requirements Bullet 2.
Five 10/100/1000Mbps RJ45 interfaces & Two 100/1000Mbps SFP interfaces.
Management via CLI, Telnet, SSH, SSL, SNMP, Web GUI.

Out of stock

Përshkrimi

IP & MAC Address: Single MAC address, IP address, subnet mask and default gateway, Support for DHCP.
Power (AC):

Internal via IEC connector A.
uto-sensing 96VAC-240VAC.
Max consumption 0.2Amps RMS @230VAC.
MTBF 400,000hrs.

Power (DC):

Nominal -48VDC, 4mm terminal block, -33VDC to -75VDC, 0.35A max, MTBF 1,790,000hrs.
Nominal -24VDC, 4mm terminal block, -18VDC to -75VDC, 0.55A max, MTBF 800,000hrs.

Ethernet Interfaces:

Auto-sensing or manual.
SFP cage (module not supplied) for various fibre modes.

TDM port (T1):

4 ports.
User switchable T1/E1.
RJ45 connector.
Presents as DCE (crossed cable for DTE).
100 Ohm.
Unframed 1.544Mbps.
Framed 1.536Mbps (robbed-bit).
ESF or D4 selectable.
B8ZS or AMI selectable.

TDM port (E1):

4 ports.
User switchable E1/T1.
RJ45 connector.
Presents as DCE (crossed cable for DTE).
120 Ohm.
75 Ohm user-selectable via converter cable.
703 unstructured.
704 channelized.
ITU G.706.
Selectable CRC4/non-CRC4.
Transparent to user signaling.

Më shumë informacion

Safety	EC EN60950-1:2002 ACA TS001:1997 ACS/NZ60950:2000 AS/NZS3260:1993 IEC950
Configuration	Held in non-volatile memory
Humidity	10-90% non-condensing
Operating Temperature	-20degC to +55degC