Produkte Transition Networks
-
Transition Networks’ L1000i-at is a 1-port 10/100/1000Base-T PoE+ midspan injector which provides a simple, cost-effective, fully IEEE 802.3at compliant solution to upgrade existing infrastructure with PoE+. Powering high-powered PoE+ enabled network devices, such as PTZ dome network cameras, can be...
-
Flexible design for growing networks simplify your installation of Transition Networks’ stand-alone media converters with the Media Converter Rack. This 19” rack-mountable unit supports up to twelve media converters while the unique design allows for multiple connections, consolidated into a...
-
The Mini Media Converter Chassis is a 19” rack mountable powered chassis for the Mini family of stand-alone media converters. Designed for Transition Networks’ line of office grade, non-hardened, mini media converters, this chassis is ideal for installations where multiple...
-
The ION219-x is an intelligent, high-density, multi-protocol system supporting a variety of network interface devices. Designed for both carrier class and enterprise network applications where multiple points of fiber integration and secure network management of the fiber interface devices is...
-
25105 Industrial DIN Rail Mounted Power Supply Key Features: 91% High Efficiency 150% Peak Load Protected against: Short Circuit Overload Over Voltage Overheating Convection air cooling DIN rail mountable UL 508 approved Full load burn in test RoHS compliant MTBF...
-
The RMS19-SA4-01-B is a non-powered, 1RU, 19″ rack mount shelf with 3 face plate blanks that is designed to hold up to 4 of Transition Networks single height stand-alone media converters. KEY FEATURES Space Saving Design: save rack space in...
-
The S4TEF10xx-125 stand-alone provides low cost transport capability through (4) T1/E1/J1 ports and (1) Ethernet port. The S4TEF10xx-125 also provides physical layer status monitoring and alarm classification functions for Telecom operators to manage their fiber optic network and reduce operation...
-
The ION106-x is an intelligent, multi-service integration platform that offers first-rate solutions for integrating, optimizing and navigating networks. By cost-effectively integrating copper and fiber equipment with infrastructure, the ION Platform equips networks for the bandwidth, distance, and security demands of...
-
1000Base-BX 1310nm TX/1490nm RX single fiber single mode (Simplex LC) with DMI [10 km/6.2 mi.] Link Budget: 12.0 dB. This Transition Networks small form factor pluggable (SFP) transceiver module is designed to install in any SFP port allowing for 1000Base-T,...
-
1000Base-BX 1310nm TX/1490nm RX single fiber single mode (Simplex LC) with DMI [10 km/6.2 mi.] Link This Transition Networks small form factor pluggable (SFP) transceiver module is designed to install in any SFP port allowing for 1000Base-T, 1000Base-SX or 1000Base-LX...
-
1000Base-BX 1490nm TX/1310nm RX single fiber single mode (Simplex LC) with DMI [10 km/6.2 mi.] Link Budget: 12.0 dB. This Transition Networks small form factor pluggable (SFP) transceiver module is designed to install in any SFP port allowing for 1000Base-T,...
-
1000Base-LX 1310nm single mode (Duplex LC) [10 km/6.2 mi.] Link Budget: 10.5 dB This Transition Networks small form factor pluggable (SFP) transceiver module is designed to install in any SFP port allowing for 1000Base-T, 1000Base-SX or 1000Base-LX interfaces to the...
-
The TN-EOT-xx is an Ethernet Extender in a standard SFP form factor, it provides the ability to leverage the existing 2-Wire or Coax cable infrastructure to extend the Ethernet service. It can extend the Ethernet service on 2-wire with distances...
-
The TN-EOT-xx is an Ethernet Extender in a standard SFP form factor, it provides the ability to leverage the existing 2-Wire or Coax cable infrastructure to extend the Ethernet service. It can extend the Ethernet service on 2-wire with distances...
-
Transition Networks Ethernet Over 2-Wire Extender with PoE+ provides the ability to quickly and easily upgrade Ethernet networks with modern PoE powered IP devices without the need to replace the existing copper wire infrastructure. The extenders leverage existing 18-24 AWG...
-
Transition Networks Ethernet Over 2-Wire Extender with PoE+ provides the ability to quickly and easily upgrade Ethernet networks with modern PoE powered IP devices without the need to replace the existing copper wire infrastructure. The extenders leverage existing 18-24 AWG...
-
NEC-FXE-xx-02 Series ExpressCard PCIe Fast Ethernet Fiber Network Interface Cards NEC-FXE-xx-02 Series Fast Ethernet ExpressCard provides a 100Base-FX fiber port for delivering fiber optic connectivity to laptop computers in high security, fiber rich, LAN environments. This small sized fiber card...
-
1000Base-LX 1310nm single mode (Duplex LC) with DMI [10 km/6.2 mi.] Link Budget: 10.5 dB This Transition Networks small form factor pluggable (SFP) transceiver module is designed to install in any SFP port allowing for 1000Base-T, 1000Base-SX or 1000Base-LX interfaces...
-
The M/GE-ISW Series is an hardened Gigabit Ethernet Mini media converter that provides a cost effective, entry-level media conversion between 10/100/1000Base-T ports and 1000Base-SX/LX ports for hardened or outdoor 10/100/1000 environments. With its supported operating temperature range of -40°C to...
-
Key features: IEEE 802.3af PD Power Input from RJ-45 TP interface Unit & Port LEDs allow for quick status information Auto-Negotiation Fixed Full-Duplex on Fiber Auto-MDI/MDIX on copper port Active Link Pass Through Jumbo Frame (up to 10240 bytes) Multiple mounting options...
-
1000Base-LX 1550nm TX/1310nm RX single mode (Simplex LC) with DMI [10 km/6.2 mi.] Link Budget: 11.0 dB. Per Cisco Systems’ literature, the Cisco switches with SFP slots do not accept modules other than Cisco’s own SFPs. The Cisco switch identifies...
-
1000Base-LX 1310nm TX/1550nm RX single mode (Simplex LC) with DMI [10 km/6.2 mi.] Per Cisco Systems’ literature, the Cisco switches with SFP slots do not accept modules other than Cisco’s own SFPs. The Cisco switch identifies the manufacturer ID along...
-
KEY FEATURES Variable AC input range. Protected against: Short Circuit. Over Voltage. Convection air cooling. DIN rail mountable. Full load burn in test. RoHS compliant. MTBF 136.8Khrs. UL 508 approved. Datasheet
-
KEY FEATURES Universal AC input/full range. 3 pole AC inlet IEC320-C14. Built-in active power factor controller function. Industrial (-30°C to +70°C) operating temperature. No load power consumption ≤0.15 Watts. Energy efficiency Level VI. Compliant with EIASA 2007/DoE, NRCan, AU/NZ MEPS,...
-
The ION C3110 is a media converter module that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through...
-
This switch is a high performance Layer 2 managed Ethernet switch with (8) 10/100/1000Base-T copper ports and (2) dual speed 100/1000Base-X SFP/RJ-45 Combo slots. Key benefits include: secure and high performance connections, flexible copper/fiber dual uplinks, and unified communications with open standard....
-
SM8TAT2DPB Managed PoE+ Switch (8) 10/100/1000Base-T Ports + (2) 100/1000 SFP/RJ-45 Combo Ports This switch is a high performance Layer 2 managed switch with 20Gbps switching capacity. It provides (8) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2)...
-
Managed PoE+ Switch (16) 10/100/1000Base-T Ports + (2) 100/1000 SFP/RJ-45 Combo Ports This switch is a high performance Layer 2 managed switch with 36Gbps switching capacity. It provides (16) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability, it has (2)...
-
25104 Industrial DIN Rail Mounted Power Supply Key Features: 94% High Efficiency 150% Peak Load Protected against: Short Circuit Overload Over Voltage Overheating Convection air cooling DIN rail mountable UL 508 approved Full load burn in test RoHS compliant MTBF...
-
S3280-TST Remotely Managed Network Interface Device (NID) with Traffic Generator Transition Networks’ managed S3280 NID provides advanced packet performance metering and service creation directly at customer premises and cell sites. The S3280 is designed for business Ethernet and mobile backhaul...
-
Remotely Managed NID with Built-in Traffic Generator (2) 10/100/1000Mbps RJ-45 ports with (4) 100/1000Mbps SFP ports Transition Networks’ managed S3290 NID provides advanced packet performance metering and service creation directly at the customer premises and cell sites. The S3290 is...
-
Scorpion-USB™ 2.0 to Fast Ethernet Fiber Adapter 100Base-FX TN-USB-FX-01 Series Use the Scorpion-USB™ Fast Ethernet fiber adapter to create an EMI-secure data connection between a USB port on a PC, laptop or tablet and a 100Mbps fiber Ethernet port on...
-
TN-USB3-SX-01 Scorpion-USB™ 3.0 to Gigabit Ethernet Fiber Adapter 1000Base-SX Use the Scorpion-USB™ 3.0 Gigabit Ethernet Fiber Adapter to create an EMI-secure data connection between a USB port on a PC, laptop or tablet and a 1000Mbps Ethernet fiber port on...
-
SISPM1040-362-LRT Managed Hardened PoE+ Switch (4) 10/100/1000Base-T PoE+ + (2) 10/100/1000Base-T RJ-45 + (2) 100/1000Base-X SFP Ports The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to...
-
SISPM1040-384-LRT-C Managed Hardened PoE+ Switch (8) 10/100/1000Base-T PoE+ Ports + (4) 100/1000Base-X SFP Ports The SISPM1040-384-LRT-C is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30Watts per port...
-
SM24TAT2SA Smart Managed PoE+ Switch(24) 10/100/1000Base-T Ports + (2) 100/1000 SFP Slots This switch is a next generation smart managed switch with 52Gbps switching capacity. It provides (24) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000...
